LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System [Standard Deployment Control System] >> Curtain Air Bag Module Removal/Installation [Standard Deployment Control System] >> Clip Removal Note

Clip Removal Note

  1. Pull out the pin with flathead screwdriver as shown in the figure.
    Fig 1: Pulling Out Pin With Flathead Screwdriver
    G09076063
  2. Insert a flathead screwdriver into shown in the figure.
    Fig 2: Inserting Flathead Screwdriver Into Curtain Air Bag Module
    G09076064
  3. While pulling the curtain air bag in the direction of the arrow shown in the figure (1), detach tabs by prying with a flathead screwdriver in the direction of the arrow (2) (3).
  4. Remove the clip from the body.
    Fig 3: Removing Clip From Body
    G09076065
scientia non olet · About LEMON Manuals