2013-2015 CX-5 - Mil Light After Pcm Reprogramming (SA-044/17)

WARNING: This page is about the CX-5 Grand Touring, AWD, which is a different variant/trim than selected.

Publication date: 2017-04-21
Reference number: SA-044/17

2013-2015 CX-5 - MIL LIGHT AFTER PCM REPROGRAMMING

TECHNICAL SERVICE BULLETIN

Reference Number(s): SA-044/17, Date of Issue: 04/21/2017

MAZDA:

2013-2015 CX-5

DESCRIPTION

2013-2015 CX-5 Check Engine Light (with DTCs P0101, P061B, P2122, P2138) may illuminate after PCM reprogramming due to a mislogic detection in the PCM calibration, available in IDS version 103.03 - 104.02. Please update IDS to version 104.03 or higher to prevent this situation (current version is 105.01).

If PCM is reprogrammed with the problem software, the attached procedure should be done to restore the PCM after update to IDS 104.03 or higher (current version is 105.01.). When the procedure is completed, confirm that PCM software number or initial 6 digit of CALID is NOT included in the list below.

Problem Software Number:

PROBLEM SOFTWARE NUMBER

PE02-18881-P	(CALID: PE02EP...)
PE1B-18881-P	(CALID: PE1BEP...)
PE1D-18881-P	(CALID: PE1DEP...)
PE1F-18881-P	(CALID: PE1FEP...)
PE2R-18881-J	(CALID: PE2REJ...)
PE2P-18881-J	(CALID: PE2PEJ...)
PE2N-18881-H	(CALID: PE2NEH...)
PEZ3-18881-B	(CALID: PEZ3EB...)
PEZ2-18881-B	(CALID: PEZ2EB...)
PE1H-18881-N	(CALID: PE1HEN...)
PE1K-18881-N	(CALID: PE1KEN...)
PE1M-18881-N	(CALID: PE1MEN...)
PE1P-18881-N	(CALID: PE1PEN...)
PE2V-18881-H	(CALID: PE2VEH...)
PE2T-18881-H	(CALID: PE2TEH...)
PE2S-18881-G	(CALID: PE2SEG...)
PUZ5-18881-B	(CALID: PUZ5EB...)
PUZ4-18881-B	(CALID: PUZ4EB...)

Please use the attached procedure to reflash the PCM back to the previous level.