LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Oil Pump Driven Sprocket Installation Note

Oil Pump Driven Sprocket Installation Note

  1. Temporarily assemble the crankshaft pulley lock bolt, and lock the oil pump against rotation as shown in the figure.
  2. Install the oil pump driven sprocket.

    Tightening torque 20-30 N.m {2.1-3.0 kgf.m, 15-22 ft.lbf} 

  3. Remove the temporarily assembled crankshaft pulley lock bolt.
    Fig 1: Installing Oil Pump Driven Sprocket
    G09074178
scientia non olet · About LEMON Manuals