LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Front Seat Back Component Removal/Installation >> Passenger-side

Front Seat Back Component Removal/Installation: Passenger-side

  1. Switch the ignition off (LOCK).
  2. Disconnect the negative battery cable and wait for 1 min  . (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION ).
  4. Remove the front seat side cover. (See FRONT SEAT SIDE COVER REMOVAL/INSTALLATION ).
  5. Slide hook A in the order of arrows (1), (2), (3) shown in the figure and set the front seat cushion trim aside.
  6. Disconnect the side air bag module connector.
    Fig 1: Sliding Front Seat Side Cover Hook
    G09076777
    Fig 2: Disconnecting Side Air Bag Module Connector And Hook
    G09076778
  7. Disconnect the front seat back warmer connector, (with seat warmer system)
  8. Disengage clip B.
  9. Set hook C aside in the direction of the arrow (4) shown in the figure.
  10. Remove the bolts A, then remove the front seat back component.
    Fig 3: Front Seat Back Component Bolts With Torque Specifications
    G09076779
  11. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals