Washer Fluid-Level Sensor Inspection

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
Set the front over fender aside. (See FRONT OVER FENDER REMOVAL/INSTALLATION ).
Set the mudguard (RH) aside. (See MUDGUARD REMOVAL/INSTALLATION ).
Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION ).
Inspect for continuity according to washer fluid level between the washer fluid-level sensor terminals.

Fig 1: Identifying Washer Fluid Level Sensor Terminals Continuity
- If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION ).
  
  Fig 2: Identifying Washer Fluid-Level Sensor Connector Terminals Continuity