LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Sport, FWD, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Engine Front Cover Removal Note

Engine Front Cover Removal Note

  1. Remove the insulator shown in the figure.
    Fig 1: Engine Front Cover Insulator And Mounting Nut With Torque Specification
    G09074168
  2. Set the ground cable and wiring harness bracket shown in the figure aside.
  3. Remove the engine front cover installation bolts.
  4. Using a screwdriver wrapped in a cloth, peel the sealant away a little at a time, and remove the engine front cover.
    CAUTION:
    • Do not apply excessive force to the screwdriver. Otherwise, the engine front cover could be damaged.
    • Be careful not to scratch or damage the seal surface. Otherwise, it could cause oil leakage.
    Fig 2: Ground Cable, Wiring Harness Bracket And Mounting Bolts With Torque Specification
    G09074169
    Fig 3: Removing Sealant From Engine Front Cover Using Screwdriver Wrapped In Cloth
    G08348024
    Fig 4: Identifying Engine Oil Applying Areas
    G08348025
scientia non olet · About LEMON Manuals