LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Sport, FWD, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Plug Hole Plate Removal/Installation >> Removal

Plug Hole Plate Removal/Installation: Removal

  1. Pull up the front part of the plug hole plate at the same time and remove the rubber from the adapter on the engine side.
    Fig 1: Removing Rubber From Engine Side Adapter
    G09074083
  2. Pull up the plug hole plate in the order shown in the figure and remove the adapter from the rubber on the engine side.
    Fig 2: Pulling Up Plug Hole Plate
    G09074084
scientia non olet · About LEMON Manuals