LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Sport, FWD, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Clock Inspection >> Notes

Clock Inspection: Notes

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the following parts:
    1. Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R] ).
    2. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION ).
    3. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION ).
    4. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION ).
    5. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION ).
    6. Side wall (See SIDE WALL REMOVAL/INSTALLATION ).
    7. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION ).
    8. Front console (See FRONT CONSOLE REMOVAL/INSTALLATION ).
    9. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
    10. Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER] ).
  3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  4. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
    • If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s).
      • If the system does not operate normally even though the inspection items are normal, replace the clock.
scientia non olet · About LEMON Manuals