LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Sport, FWD, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Lock System >> Liftgate Opener Switch Inspection

Liftgate Opener Switch Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION ).
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION ).
    3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION ).
    4. Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION ).
    5. Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION ).
  3. Verify the continuity of liftgate opener switch terminals B and C.
    • If not as indicated in the table, replace the liftgate opener switch.
      Fig 1: Switch Position Terminal Reference Chart
      G09077058
      Fig 2: Checking Continuity Of Liftgate Opener Switch Terminals B And C
      G09077059
scientia non olet · About LEMON Manuals