| BRAKE_SW1 (Brake switch status) |
On/Off |
- Brake pedal depressed. On
- Brake pedal not depressed Off
|
Brake switch inspection |
3S |
| BRAKE_SW2 (Brake switch 2 status) |
On/Off |
- Brake pedal depressed. On
- Brake pedal not depressed: Off
|
Brake switch 2 inspection |
3E |
| BZR_OUT (Keyless beeper status) |
On/Off |
- Keyless beeper sound On
- Keyless beeper not sound: Off
|
Keyless beeper inspection |
3K |
| CLUTCH_SW (Clutch switch status) |
On/Off |
- Clutch pedal pressed: On
- Clutch pedal released. Off
|
Clutch switch inspection |
3B |
| IMMOBI (Immobilizer function present/ not present) |
On/Off |
- Immobilizer function present: On
- Immobilizer function not present. Off
|
Keyless control module inspection |
- |
| LOCK_SW_D (Door lock-link switch status) |
Lock/Unlock |
- Driver's door. LOCK. Lock
- Driver's door. UNLOCK: Unlock
|
Door lock-link switch inspection |
3P |
| MON_ACC (ACC relay monitor) |
On/Off |
- Switch the ignition to ACC: On
- Switch the ignition to Off
|
ACC relay inspection |
2A |
| MON_IG1 (IG1 relay monitor) |
On/Off |
- Switch the ignition to ON. On
- Switch the ignition to ACC or off: Off
|
IG1 relay inspection |
2C |
| MON_IG2 (IG2 relay monitor) |
On/Off |
- Switch the ignition to ON: On
- Switch the ignition to ACC or off. Off
|
IG2 relay inspection |
4X |
| NUMCARD (Number of advanced keys) |
- |
- Number of programmed advanced keys. 0-6
|
Keyless control module inspection |
- |
| NUMKEY (Number of key codes) |
- |
- Number of programmed key codes. 0-8
|
Keyless control module inspection |
- |
| PUSH_ST1 (Push button start1 status) |
On/Off |
- Push button start pressed: On
- Other than these conditions. Off
|
Push button start inspection |
2J |
| PUSH_ST2 (Push button start2 status) |
On/Off |
- Push button start pressed. On
- Other than these conditions: Off
|
Push button start inspection |
2K |
| REQ_SW_L (Request switch (LF) status) |
On/Off |
- Request switch (LF) pressed: On
- Request switch (LF) released: Off
|
Request switch (LF) inspection |
3X |
| REQ_SW_R (Request switch (RF) status) |
On/Off |
- Request switch (RF) pressed: On
- Request switch (RF) released Off
|
Request switch (RF) inspection |
3U |
| REQ_SW_3K |
On/Off |
NOTE:
- Cannot be used in the inspection, and Off is normally displayed
|
- |
- |
| RLY_ACC (ACC relay status) |
On/Off |
- Switch the ignition to ACC On
- Switch the ignition to off. Off
|
ACC relay inspection |
4F |
| RLY_JG1 (IG1 relay status) |
On/Off |
- Switch the ignition to ON. On
- Switch the ignition to ACC or off. Off
|
IG1 relay inspection |
4E |
| RLY_IG2 (IG2 relay status) |
On/Off |
- Switch the ignition to ON: On
- Switch the ignition to ACC or off: Off
|
IG2 relay inspection |
4H |
| RLY_ST (Starter relay status) |
On/Off |
- Switch the ignition to START (STARTER relay on): On
- Other than these conditions: Off
|
Starter relay inspection |
4B |
| SHIFT_N (Shift lever position) |
N/Not_N |
- Shift lever in N range: N
- Other than these conditions: Not_N
|
Neutral switch inspection |
3T |
| VPWR1 (Keyless control module power supply voltage 1) |
V |
|
Battery inspection |
1D |
| VPWR2 (Keyless control module power supply voltage 2) |
V |
|
Battery inspection |
1E |
| VPWR3 (Keyless control module power supply voltage 3) |
V |
|
Battery inspection |
1B |