DTC B113E:11 [Advanced Keyless Entry And Push Button Start System]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION POSSIBLE CAUSE
| DETECTION CONDITION |
Trunk lid opener switch (vehicle exterior) circuit voltage less than 1 V is detected for 1 s
, while ignition switch is ON |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Trunk lid opener switch (vehicle exterior) malfunction
- Short to ground in wiring harness between trunk lid opener switch (vehicle exterior) terminal B and keyless control module terminal 3G
- Short to ground in wiring harness between trunk lid opener switch (vehicle exterior) terminal B and BCM terminal 6E
- BCM malfunction
- Keyless control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|