DTC B10C8:1F [Advanced Keyless Entry And Push Button Start System]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE
| DETECTION CONDITION |
Cannot receive signal correctly from keyless antenna (interior, center) |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Short to ground in the wiring harness between keyless antenna (interior, center) terminal C and keyless control module terminal 3L
- Short to ground in the wiring harness between keyless antenna (interior, center) terminal D and keyless control module terminal 3Y
- Short to power supply in the wiring harness between keyless antenna (interior, center) terminal C and keyless control module terminal 3L
- Short to power supply in the wiring harness between keyless antenna (interior, center) terminal D and keyless control module terminal 3Y
- Open circuit in the wiring harness between keyless antenna (interior, center) terminal C and keyless control module terminal 3L
- Open circuit in the wiring harness between keyless antenna (interior, center) terminal D and keyless control module terminal 3Y
- Keyless antenna (interior, center) malfunction
- Keyless control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|