LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Touring >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Abs/Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/CM.
    Fig 1: Placing Alignment Mark On Brake Pipe And DSC HU/CM
    G08150684
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
scientia non olet · About LEMON Manuals