| DESCRIPTION |
- B110E
- Driver-side side air bag sensor No.2 ID mismatch
- B110F
- Passenger-side side air bag sensor No.2 ID mismatch
- B2856
- Crash zone sensor ID mismatch
- B2886
- Passenger-side side air bag sensor No.1 ID mismatch
- B2887
- Driver-side side air bag sensor No.1 ID mismatch
|
| DETECTION CONDITION |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- The SAS control module detects an error of impact magnitude set in the sensor, which occurs due to installation mismatch of the crash zone sensor or side air bag sensors.
|
| FAIL-SAFE FUNCTION |
- |
| POSSIBLE CAUSE |
- Crash zone sensor not installed correctly or wrong sensor installed
- Driver-side side air bag sensor No.1 not installed correctly or wrong sensor installed
- Passenger-side side air bag sensor No.1 not installed correctly or wrong sensor installed
- Driver-side side air bag sensor No.2 not installed correctly or wrong sensor installed
- Passenger-side side air bag sensor No.2 not installed correctly or wrong sensor installed
|
| SYSTEM WIRING DIAGRAM |
- |