LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Glass/Windows/Mirrors) >> Power Window Main Switch Inspection >> Notes

Power Window Main Switch Inspection: Notes

WARNING: This page is about a different car, the 2012 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (driver's side) (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (driver's side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the main switch panel. (driver's side) (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY .)
  5. Connect the power window main switch connector.
  6. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  7. Measure the voltage at each terminal.
    • If the voltage is not as specified in the terminal voltage table, inspect the parts under Inspection item (s) and related wiring harnesses.
      • If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window main switch.
scientia non olet · About LEMON Manuals