LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Standard Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Ambient Temperature Sensor Removal/Installation

Ambient Temperature Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the table.
    Fig 1: Identifying Ambient Temperature Sensor And Connector
    G09133678
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals