On-Board Diagnostic [Dynamic Stability Control System]

• Dynamic Stability Control System Wiring Diagram [Dynamic Stability Control (DSC)]
• On-Board Diagnosis [Dynamic Stability Control (DSC)]
  • On-Board Diagnostic (OBD) Test Description
  • Read/Clear Diagnostic Results
  • PID/Data Monitor and Record
  • Active Command Modes
  • Reading DTCs Procedure
  • Clearing DTCs Procedures
  • PID/Data Monitor and Record Procedure
  • Active Command Modes Procedure
  • DTC Table
  • PID/DATA Monitor Table
  • Active Command Modes Table
• DTC C0001:01/DTC C0002:01/DTC C0003:01/DTC C0004:01/DTC C0010:01/DTC C0011:01/DTC C0014:01/DTC C0015:01/DTC C0018:01/DTC C0019:01/DTC C001C:01/DTC C001D:01: Traction control solenoid valve
  • Notes
  • Diagnostic Procedure
• DTC C0020:01/DTC C0020:1C/DTC C0020:71: DSC motor relay signal
  • Notes
  • Diagnostic Procedure
• DTC C0030:07/DTC C0031:07/DTC C0033:07/DTC C0034:07/DTC C0036:07/DTC C0037:07/DTC C0039:07/DTC C003A:07: ABS wheel-speed sensor/ABS sensor rotor
  • Notes
  • Diagnostic Procedure
• DTC C0031:01/DTC C0034:01/DTC C0037:01/DTC C003A:01: ABS wheel-speed sensor
  • Notes
  • Diagnostic Procedure
• DTC C0040:64: Brake switch ON signal
  • Notes
  • Diagnostic Procedure
• DTC C0044:01/DTC C0044:28/DTC C0044:64: Brake fluid pressure sensor
  • Notes
  • Diagnostic Procedure
• DTC C0051:28: Abnormal message from EPS control module
  • Notes
  • Diagnostic Procedure
• DTC C0061:28/DTC C0061:64/DTC C0063:28/DTC C0063:64: SAS control module system
  • Notes
  • Diagnostic Procedure
• DTC C006B:00/DTC C0072:68: TCS/DSC control system
  • Notes
  • Diagnostic Procedure
• DTC C1109:64: DSC OFF switch
  • Notes
  • Diagnostic Procedure
• DTC U0001:88/DTC U0100:00/DTC U0126:00/DTC U0155:00/DTC U2101:00: CAN line
  • Notes
  • Diagnostic Procedure
• DTC U0151:00: SAS control module system (CAN2 line malfunction)
  • Notes
  • Diagnostic Procedure
• DTC U0401:68: Abnormal message from PCM
  • Notes
  • Diagnostic Procedure
• DTC U0428:00/DTC U0428:64/DTC U0428:68: Abnormal message from EPS control module (steering column internal malfunction)
  • Notes
  • Diagnostic Procedure
• DTC U0452:86: Abnormal message from SAS control module
  • Notes
  • Diagnostic Procedure
• DTC U2100:00: Configuration data not recorded
  • Notes
  • Diagnostic Procedure
• DTC U3000:47/DTC U3000:48/DTC U3000:49: DSC CM (internal malfunction)
  • Notes
  • Diagnostic Procedure
• DTC U3000:DTC 54: DSC HU/CM (unperformed initialization procedure)
  • Notes
  • Diagnostic Procedure
• DTC U3003:16/DTC U3003:17: Power supply system
  • Notes
  • Diagnostic Procedure