LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 1.5] >> Knock Sensor (KS) Removal/Installation

Knock Sensor (KS) Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Disconnect the KS connector.
  4. Remove the KS using the SST
  5. Install in the reverse order of removal.
    Fig 1: Removing KS Using SST With Torque Specifications
    G09130346
scientia non olet · About LEMON Manuals