LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 1.5] >> Camshaft Position (CMP) Sensor Removal/Installation

Camshaft Position (CMP) Sensor Removal/Installation

CAUTION:
  • When replacing the CMP sensor, make sure there is no foreign material on it such as metal shavings. If it is installed with foreign material, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
  1. Disconnect the negative battery cable.
  2. Disconnect the CMP sensor connector.
  3. Remove the CMP sensor.
  4. Install in the reverse order of removal.
    Fig 1: CMP Sensor And Mounting Bolt With Torque Specification
    G09130345
scientia non olet · About LEMON Manuals