LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> MX-5 Miata Special Edition >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection

Buckle Switch Inspection

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the buckle switch connector.
  4. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the illustration, replace the buckle.
      Fig 1: Terminal Continuity Chart
      G06150859Courtesy of MAZDA MOTORS CORP.
      Fig 2: Buckle Switch Connector Terminal
      G06150860Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals