LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> CX-9 Touring, 3.7L Eng VIN V, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System/Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU/Cm Inspection >> Notes

DSC/RSC HU/Cm Inspection: Notes

  1. Disconnect the DSC/RSC HU/CM connector. (See DSC/RSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
  3. Attach the tester lead to the DSC/RSC HU/CM harness side connector, then inspect voltage, continuity or resistance according to the standard (reference value) on the table.
scientia non olet · About LEMON Manuals