Outer Mirror Glass Installation

Connect the heated outer mirror connectors. (Vehicles with heated outer mirrors)
Connect the BSM indicator light connector. (Vehicles with BSM)
NOTE:
- Lightly pull the BSM indicator light connector and verify that the BSM indicator light housing cannot be pulled off. If the connection is poor, insert a tape-wrapped flathead screwdriver into position A shown in the illustration and engage the connector.
  
  Fig 1: Identifying Outer Mirror Glass, Mirror Glass Holder And Heated Outer Mirror Connector
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying BSM Indicator Light Connector, Outer Mirror Glass And BSM Indicator Light Housing
  Courtesy of MAZDA MOTORS CORP.
Press part A on the outer mirror glass and install pin A .
Press part B on the outer mirror glass and install pins B.

Fig 3: Identifying Outer Mirror Glass, Pin And Mirror Glass Holder
Courtesy of MAZDA MOTORS CORP.