LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> CX-9 Sport, 3.7L Eng VIN A, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation [Advanced Keyless Entry And Start System] >> Liftgate

Request Switch Removal/Installation [Advanced Keyless Entry And Start System]: Liftgate

  1. Disconnect the negative battery cable.
  2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  3. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
  4. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  5. Remove the rear finisher. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  6. Press the tabs and remove the request switch.
  7. Install in the reverse order of removal.
    Fig 1: Identifying Request Switch, Rear Finisher And Request Switch Tabs
    G04971326Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals