LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> CX-7 i Touring, 2.5L Eng VIN M >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System And Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure.
    Fig 1: Identifying Master Cylinder (Secondary Side And Primary Side)
    G08245437
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About LEMON Manuals