LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> CX-7 i SV, 2.5L Eng VIN M >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System And Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Installation Note

DSC HU/CM Installation Note

  1. Install the rubber mount on DSC HU/CM section A to the bracket as shown in the figure.
    Fig 1: Rubber Mount On DSC HU/CM Section To Bracket
    G08245436
  2. Install DSC HU/CM section B to the bracket.
  3. Install the nuts to DSC HU/CM section A and tighten them.
scientia non olet · About LEMON Manuals