No.7 Programming Procedure Due to Simultaneous Replacement of Immobilizer System-related Parts (PCM, Keyless Control Module, and Steering Lock Unit): Notes
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- The menu and execution sequence of the M-MDS vary depending on the type of replaced unit and parts. Perform the procedures referring to the following table.
M-MDS menu
- (1): Parameter Reset
- (2): Ignition Key Code Erase and Program
- (3): Program Additional advanced key
- (4): Steering Lock Unit Programming
| Replacement part | M-MDS execution menu/sequence | Conditions |
|---|---|---|
| Keyless control module and PCM | (1)→(2)→(3)→(4) |
|
| Keyless control module and steering lock unit *1 | ||
| Keyless control module, PCM, and steering lock unit *1 | ||
| PCM and steering lock unit *1 | (1)→(2)→(4) | Have two or more keys to be programmed after the replacement. |
*1 Because the steering lock unit is integrated with the ignition key cylinder, the key must also be replaced when replacing the steering lock unit .