LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (On-Board Diagnostic [Advanced Keyless Entry And Push Button Start System)) >> DTC B11E8:12 [Advanced Keyless Entry And Push Button Start System] >> Vehicles With ABS/TCS

Vehicles With ABS/TCS

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION POSSIBLE CAUSE

DETECTION CONDITION  ABS driver circuit voltage higher than threshold (2.2-6.5 V  ) is detected under the following conditions
  • Ignition switch is off
  • ABS driver circuit is not active
POSSIBLE CAUSE 
  • Connector or terminal malfunction
  • Short to power supply in wiring harness between ABS/TCS HU/CM terminal AF and keyless control module terminal 4S
  • Keyless control module malfunction
G06199708Courtesy of MAZDA MOTORS CORP.