LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (On-Board Diagnostic [Advanced Keyless Entry And Push Button Start System)) >> DTC B11E8:11 [Advanced Keyless Entry And Push Button Start System] >> Vehicles With ABS/TCS

Vehicles With ABS/TCS

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE

DETECTION CONDITION  ABS driver circuit voltage less than threshold (2.2-6.5 V  ) is detected under the following conditions.
  • Ignition switch is off
  • ABS driver circuit is active
POSSIBLE CAUSE 
  • Connector or terminal malfunction
  • Short to ground in wiring harness between ABS/TCS HU/CM terminal AF and keyless control module terminal 4S
  • Keyless control module malfunction
G06199706Courtesy of MAZDA MOTORS CORP.