LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (On-Board Diagnostic [Advanced Keyless Entry And Push Button Start System)) >> Clearing DTC [Advanced Keyless Entry And Push Button Start System]

Clearing DTC [Advanced Keyless Entry And Push Button Start System]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
    2. Fig 1: Identifying DLC-2
    G06199656Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules"
      3. Select "RKE".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "RKE".
      3. Select "Self Test".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON and wait for 5 s  or more.
  7. Press the retest button on the DTC screen.
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals