No. 5 Electronic Steering Mechanism Does Not Operate [Advanced Keyless Entry And Push Button Start System]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRONIC STEERING MECHANISM DOES NOT OPERATE DESCRIPTION AND POSSIBLE CAUSES
| 5 |
Electronic steering mechanism does not operate |
| DESCRIPTION |
- Steering does not lock during system IG OFF, door lock, door open/close
|
| Possible Causes |
- Steering lock unit malfunction
- EGI fuse STEERING LOCK fuse malfunction
- Open/short circuit in wiring harness between battery + terminal and keyless control module
- Open or short circuit in wiring harness between keyless control module and steering lock unit
- Connector connection malfunction
- Open circuit in wiring harness between keyless control module and DSC CM
- Open circuit in wiring harness between door lock link switch and keyless control module
- Open circuit in wiring harness between keyless control module and ground.
- Communication error between keyless control module and DSC CM
- Keyless control module malfunction
- DSC CM malfunction
- CAN system malfunction
|