Torque Converter Installation Nuts Installation Note

Hold the crankshaft pulley to prevent drive plate from rotating.

Fig 1: Installing Torque Converter Installation Nut
Tighten the torque converter nuts from the starter installation hole.

Fig 2: Locating Torque Converter Nut And Starter Installation Hole
CAUTION:
- Loosely and equally tighten the torque converter nuts, then further tighten them to the specified tightening torque.
  Tightening torque
- 41-54 N.m {4.2-5.5 kgf.m, 31-39 ft.lbf}