LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 5 Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Overhaul (FS5A-El) >> Reduction Brake Disassembly/Assembly >> Snap Ring Disassembly Note

Snap Ring Disassembly Note

  1. Install the SST  as shown.
    CAUTION:
    • Depress the spring and retainer component only enough to remove the snap ring.

      Overpressing will damage the spring and retainer component assembly edges.

  2. Compress the spring and retainer component.
  3. Remove the snap ring.
  4. Remove the SST  and remove spring and retainer component.
    Fig 1: Compressing Spring And Retainer Component
    G05118747Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals