LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 5 Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service, Removal & Installation FS5A-El) >> Input/Turbine Speed Sensor Inspection >> Part Inspection

Part Inspection

  1. Measure resistance between input/turbine speed sensor terminals A and B.
    Fig 1: Identifying Input/Turbine Speed Sensor Connector Terminals
    G08152091
    • If there is any malfunction, replace the input/turbine speed sensor.

      Input/turbine speed sensor resistance 

    • 250-600 ohms
scientia non olet · About LEMON Manuals