Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY PCM DTC Perform the PCM DTC inspection using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .) Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE .)
1		No	Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION .) Repair or replace the malfunctioning part according to the inspection results.
2	Verify test results. If normal, return to the diagnostic index to service any additional symptoms. (See ENGINE CONTROL SYSTEM SYMPTOM DIAGNOSTIC INDEX .) If the malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis. If the vehicle is repaired, troubleshooting is completed. If the vehicle is not repaired or additional diagnostic information is not available, reprogram the PCM if a later calibration is available. Retest.