LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 i Sport, 2.0L Eng VIN G, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Beeper Removal/Installation

Keyless Beeper Removal/Installation

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  2. Slightly bend back the front mudguard. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Identifying Keyless Beeper And Connector
    G08158887
  4. Remove the keyless beeper in the direction of the arrow shown in the figure.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals