LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 i Sport, 2.0L Eng VIN F, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Security System And Locks System) >> Request Switch Removal/Installation >> Liftgate

Request Switch Removal/Installation: Liftgate

WARNING: This page is about a different car, the 2013 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  2. Remove the inboard light. (See INBOARD LIGHT REMOVAL/INSTALLATION .)
  3. Remove the screw.
    Fig 1: Identifying Inboard Light, Request Switch And Screws
    G08158877
  4. Remove the request switch.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals