LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 i Sport, 2.0L Eng VIN F, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Security System And Locks System) >> Keyless Beeper Inspection

Keyless Beeper Inspection

WARNING: This page is about a different car, the 2013 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  2. Remove the front mudguard. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  3. Remove the keyless beeper. (See KEYLESS BEEPER REMOVAL/INSTALLATION .)
  4. When applying battery positive voltage to the keyless beeper, verify that an electromagnetic sound is heard.
    Fig 1: Applying Voltage Between Keyless Beeper Connector Terminals
    G08158888
    • If the sound cannot be verified, replace the keyless beeper.
scientia non olet · About LEMON Manuals