LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 i Sport, 2.0L Eng VIN F, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Security System And Locks System) >> Immobilizer System-Related Parts Programming [Keyless Entry System] >> M-MDS Connecting Procedure

M-MDS Connecting Procedure

WARNING: This page is about a different car, the 2013 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not place the M-MDS (IDS) in the vehicle while programming the immobilizer system.
  1. Fully lower the door glass.
  2. Connect the M-MDS (IDS) to the DLC-2.
    Fig 1: Identifying DLC-2
    G08158874
  3. Place the M-MDS (IDS) outside the vehicle.
    CAUTION:
    • Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.
scientia non olet · About LEMON Manuals