Clearing Advanced Key
- Fully lower the driver-side door glass.
- Connect the M-MDS (IDS) to the DLC-2.
- Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.CAUTION:
- Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
- After the vehicle is identified, select the following items from the initialization screen of the IDS.
- Select "Body".
- Select "Security".
- Select "PATS Functions".
- Then, select items from the screen menu in the following order.
- Select "Advanced Key Code Erase and Program".
- Perform the security access according to the directions on the M-MDS screen.