PCM Connector Connection Note

CAUTION:

If the PCM connector is connected incorrectly it could be damaged. When connecting the PCM connector, connect it using the following procedure.
If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.

Fig 1: PCM Connector Inspection

Verify that the PCM connector lever is tilted towards the wiring harness side as shown in the figure.

Fig 2: PCM Connector
Insert the PCM connector straight until it contacts the PCM and verify that the lever reverts upward naturally.
Push the lever until a click is heard.

Fig 3: Connector Lever