LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 i Sport, 2.0L Eng VIN F, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Main Switch Inspection >> Notes

Power Window Main Switch Inspection: Notes

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (driver's side) (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (driver's side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the main switch panel. (driver's side) (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY .)
  5. Connect the power window main switch connector.
  6. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  7. Measure the voltage at each terminal.
    • If the voltage is not as specified in the terminal voltage table, inspect the parts under Inspection item (s) and related wiring harnesses.
      • If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window main switch.
scientia non olet · About LEMON Manuals