LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 3 Mazdaspeed, 2.3L Eng VIN 3 >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Instrumentation/Driver Info >> Information Display Input/Output Check Mode >> Check Code Inspection >> Check code 06

Check code 06

Check code 06 Ignition switch ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
1 Switch the ignition to ON.
G08159596
 Go to the next step.
G08159597
 Verify that the voltage of information display or multi information display terminal 1E is B+  .
  • If the voltage is as specified, replace the information display or multi information display.
  • If the voltage is not as specified, inspect the following parts:
    • Ignition switch(1)
    • Push button start(2)
    • Relay block(2)
    • Wiring harness(1) (Battery-ignition switch-information display or multi information display)
    • Wiring harness(2) (Battery-relay block-push button start-information display or multi information display)
2 Switch the ignition to ACC.
G08159598
 Verify that the voltage of the information display or multi information display terminal 1E is 1.0 V or less  .
  • If the voltage is as specified, replace the information display or multi information display.
  • If the voltage is not as specified, inspect the following parts:
    • Ignition switch(1)
    • Push button start(2)
    • Relay block(2)
    • Wiring harness(1) (Battery-ignition switch-information display or multi information display)
    • Wiring harness(2) (Battery-relay block-push button start-information display or multi information display)
G08159599
 Input signal to the information display or multi information display is normal.
(1) Without advanced keyless entry and push button start system 
(2) With advanced keyless entry and push button start system 
scientia non olet · About LEMON Manuals