| 1 |
Panel light control switch turned to dimmer cancel ON |
|
Go to the next step. |
|
|
Verify that the voltage of information display or multi information display terminal 1B is B+
.
- If the voltage is as specified, replace the information display or multi information display.
- If the voltage is not as specified, inspect the following parts:
- Instrument cluster
- Wiring harness (information display or multi information display-instrument cluster)
|
| 2 |
Panel light control switch turned to dimmer cancel OFF |
|
Verify that the voltage of the information display or multi information display terminal 1B is 1.0 V or less
.
- If the voltage is as specified, replace the information display or multi information display.
- If the voltage is not as specified, inspect the following parts:
- Instrument cluster
- Wiring harness (information display or multi information display-instrument cluster)
|
|
|
Input signal to the information display or multi information display is normal. |