LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Suspension System DTCS >> Tire Pressure Monitoring System (TPMS)

Tire Pressure Monitoring System (TPMS)

TIRE PRESSURE MONITORING SYSTEM (TPMS) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B106B Tire Pressure Sensor Low Battery Smart Junction Box (SJB) DTC B106B can be set during SJB configuration. See PINPOINT TEST 4: DTC B106B - TIRE PRESSURE SENSOR LOW BATTERY .
B106D Tire Pressure Monitoring System (TPMS) Initiators Not Configured SJB DTC B106D is only present when a new SJB is installed, the SJB is incorrectly flashed or the SJB is incorrectly configured. Successfully configuring the SJB is the only way to clear this DTC. VERIFY the SJB is correctly configured. If DTC B106D is still present, see MODULE CONFIGURATION .
B2477 Module Configuration Failure/Mismatch SJB DTC B2477 is only present when a new SJB is installed, the SJB is incorrectly flashed or the SJB is incorrectly configured. Successfully configuring the SJB is the only way to clear this DTC. Make sure the SJB is configured correctly. If DTC B2477 is still present, see MODULE CONFIGURATION .
B2888 Left Front Tire Pressure Sensor Fault SJB DTC B2868 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
B2869 Right Front Tire Pressure Sensor Fault SJB DTC B2869 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
B2870 Right Rear Tire Pressure Sensor Fault SJB DTC B2870 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
B2871 Left Rear Tire Pressure Sensor Fault SJB DTC B2871 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
B2872 Tire Pressure Sensor Fault SJB
NOTE:
  • If the vehicle has been stationary for more than 30 minutes, the sensors will go into a "sleep mode" to conserve battery power. It will be necessary to wake them up so they will transmit the latest tire pressure information to the SJB.
ACTIVATE the TPMS sensors. See PINPOINT TEST 3: TPMS INDICATOR FLASHES FOR 70 SECONDS AND THEN REMAINS ON SOLID WHEN THE IGNITION KEY IS TURNED TO THE ON POSITION AND DTC B2872 OR B287A IS PRESENT .
B287A Tire Pressure System Fault SJB See PINPOINT TEST 3: TPMS INDICATOR FLASHES FOR 70 SECONDS AND THEN REMAINS ON SOLID WHEN THE IGNITION KEY IS TURNED TO THE ON POSITION AND DTC B2872 OR B287A IS PRESENT .
C2780 ECU in Manufacturing Mode SJB DTC C2780 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING .
U0155 Lost Communication with Instrument Cluster SJB See PINPOINT TEST 4: THE INSTRUMENT CLUSTER DOES NOT RESPOND TO THE SCAN TOOL to diagnose the no communication problem.
All other SJB DTCs - SJB See DIAGNOSTIC TROUBLE CODE (DTC) CHART - B, C AND U CODES .