LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Front Door Window Glass Removal/Installation

Front Door Window Glass Removal/Installation

  1. Remove the front door trim panel. See FRONT DOOR TRIM PANEL REMOVAL/INSTALLATION .
  2. Remove the screw and the door trim panel bracket.
  3. Remove the 3 pushpins and pad assembly.
    Fig 1: Locating Pushpins On Pad Assembly
    G05465994Courtesy of MAZDA MOTORS CORP.
  4. Position the watershield aside.
  5. Remove the interior door glass weatherstrip.
  6. Connect the window control switch electrical connector.
  7. Using the window control switch, lower the front door window glass to gain access to the front door window glass screws.
  8. Disconnect the window control switch electrical connector.
  9. Remove the 2 front door window glass screws.
    • To install, tighten to 5 N.m {0.5 kgf.m, 44 in.lbf}.
      Fig 2: Locating Rear Door Window Glass Screws
      G05465995Courtesy of MAZDA MOTORS CORP.
  10. Remove the front door window glass.
  11. To install, reverse the removal procedure.
    • Cycle the front door window glass to make sure it is engaged correctly.
scientia non olet · About LEMON Manuals