LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute Hybrid Touring, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Ignition Lock Cylinder Removal/Installation >> Installation

Ignition Lock Cylinder Removal/Installation: Installation

  1. Make sure the ignition lock cylinder is in the ACC position.
  2. Insert the ignition lock cylinder into the ignition lock cylinder access hole located on the steering column.
    • Make sure to align the locking pin with the locking pin access hole.
  3. Install the Passive Anti-Theft System (PATS) transceiver. See PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER REMOVAL/INSTALLATION .
  4. Rotate the ignition key through all lock cylinder positions to check for correct operation.
scientia non olet · About LEMON Manuals