Base Removal

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rearview mirror.
Wind each end of a wire around a bar.
WARNING:
- Using the piano wire with bare hands can cause injury. Always wear gloves when using the piano wire.
NOTE:
- Use a long sawing action to spread the work over the whole length of the piano wire to prevent it from breaking.
Fig 1: View Of Removing Base Using Piano Wire
Courtesy of MAZDA MOTORS CORP.
Saw through the sealant to remove the base.