LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 Sport, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 560 (Entertainment System) >> Center Panel Unit Removal/Installation >> Notes

Center Panel Unit Removal/Installation: Notes

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Shift lever knob (MT) (See TRANSMISSION REMOVAL/INSTALLATION [P66M-D] .)
    2. Shift knob (AT) (See SELECTOR LEVER REMOVAL/INSTALLATION .)
    3. Upper panel (See CONSOLE REMOVAL/INSTALLATION .)
    4. Ashtray panel (See CONSOLE REMOVAL/INSTALLATION .)
    5. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    6. Knee bolster (See KNEE BOLSTER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
CAUTION:
  • When installing the center panel unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.
scientia non olet · About LEMON Manuals