LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> Steering >> Power Steering >> General Procedures [Steering System] >> General Procedures (Steering) >> Connector Disconnection

Connector Disconnection

  1. Perform the following works, before the connectors are disconnected.
    1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP] .)
    2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
    3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
scientia non olet · About LEMON Manuals