LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (On-Board Diagnostic [Advanced Keyless System)) >> Clearing DTC [Advanced Keyless And Start System]

Clearing DTC [Advanced Keyless And Start System]

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "RKE".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "RKE".
      3. Select "Self Test".
    Fig 1: Identifying DLC-2 Connector Location
    G05985702Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals